I can see clearly now - Brooch and earrings

Brooch (on the left) and pin earrings (on the right) - Clear glass jewels inset into copper for a crisp, no-clutter look. Both the brooch and the earrings have been patinaed for a vintage look.

The hook earrings are fashioned from silver wire, filled with silver solder with blue glass beads and silver baubles dangling from the top centre. A coat of black patina has also been applied for a vintage look.

The brooch displayed on a lace table cloth showing how clear the glass jewel is.

Brooches in Copper and Silver wire

Making jewellery is a fascinating past-time. Holding a piece of copper or stained glass in my hand and imagining what it can become is exciting and exhilarating, gets the creative juices flowing and can lead to hours of immersion in the design. There's a certain thrill in looking down at the new piece just made.

.10mm Silver plated wire from Germany I mostly use. Other sizes are 0.8mm and 0.6mm, after that at gets a bit too thin.

Using wire and copper in making jewellery gives you endless choices in creativity. Wire allows you the freedom to get creative with twists, turns, and wraps and endless creative shapes can be cut out of copper. I mostly use silver plated wire from Germany, but also love the .20mm copper wire you can buy from electrical shops. It's thicker, firm, but still easy to bend into shapes.

A necklace with Green beads made out of copper wire

If you're interested in using wire in jewellery making, there are many tutorials on the internet, but I found this easy one for a 'Purple Passion Pendant' at Domestic Diva. At 'All Free Jewelry Making' you will also find some useful links.

I use copper sheeting bought by the roll from many craft shops, it's soft and pliable and very easy to work with and the solder takes to it perfectly. 5 Mil (.005 inches thick) 36 gauge, copper is thick enough that it will hold shape pretty well. You cannot tear it with your hands, but it can be be cut with scissors. It is very flexible and pliable. To use in jewellery as is, you have to have something solid backing it, but covering it in solder gives it the necessary rigidity for brooches and pendants. It is perfect for die-cuts and punches. 8 Mil (.008 inches thick) 32 gauge, copper is approximately 11 - 12 times thicker than typical household aluminium foil and 1.5 times thicker than the 5 mil. This is a heavy-duty tooling foil. 8 mil can be cut fairly easily with scissors and is still very pliable and holds its shape a little better than the 5 mil, but to punch it requires quite a bit of pressure. I rarely use 10 mil as it needs to be cut with heavy duty scissors or a utility knife. As with any sheet metal, the edges can be extremely sharp. Be careful when cutting or working with copper sheeting. Whenever I create pieces that have sharp corners, I usually use an old pair of scissors (so I don't worry about ruining them) and trim the corners so that they are slightly rounded.

Here is a fairly easy tutorial on "How to work with copper sheeting".

Hand-made brooch out of copper, wire and silver solder with a clear blue glass jewel in the centre

Two amber glass jewel brooches, the first surrounded with silver solder, the second with silver wire and silver solder and a ring for hanging something

Silver wire brooch with silver wire, filled with silver solder and two seed beads

Red glass jewel brooch with silver wire filled with silver solder

White glass jewel brooch with silver wire and filled with silver solder

An iridescent glass jewel brooch with silver wire and silver solder

::

Wire and Iridescent Glass Jewel Brooch

A brooch I made out of silver wire with an iridescent blue glass jewel in the centre. The brooch pin is behind the thick silver solder at the top.

The back of the brooch

::

Blue glass jewel brooch

I crafted this brooch by cutting a hole in the centre of a piece of copper, soldering in a clear blue glass jewel and then crumpling the copper with my small flat-nose pliers to get an interesting shape. A brooch pin was soldered on the back and I applied a layer of black patina and then buffing it with some very fine steel wool to achieve a vintage look.

 The back of the brooch

Brooch with blue glass hook earrings

 Blue glass jewel brooch paired with a clear glass jewel brooch

:: 

A collection of art and jewellery

A collection of paintings and jewellery. The birds are painted in watercolour on Bockingford 300gsm.

The clock-face and orange jewel bracelet is from my "Keepsakes" range, as is the Pin Brooch with photographs and the necklace with photographs, lace and a rose petal.

.

Blue flower brooch

A brooch hand-crafted out of blue glass beads, silver wire and solder. This is from my range of ‘Afrika Street Jewellery’.

Flower detail – blue glass beads held by silver wire with a solder centre

Detail of the leaves – one pink glass leaf and the silver leaves are made out of silver wire filled with solder

Back of the brooch

::

Clear Stained glass jewel brooch

A brooch hand-crafted from copper, crumpled into a pleasing shape, with a layer of black patina to give a vintage look. A clear stained glass jewel is used in the middle.

Back of brooch

Two brooches in different colours

Matching teardrop earrings with pin and butterfly

::

Out of difficulties grow miracles

Copper with clear glass jewel brooch and earrings

I chose this back-ground for the photograph "Out of difficulties grow miracles" because I had one heck of a time making this set! The clear glass jewels are set on top of copper and, as I was soldering the jewels to the copper, the flux kept on running under the glass, causing black spots. I tried over and over again until, eventually, I just gave up and soldered it, ignoring the black spots and hoped for the best. But once I had finished the pieces, added the black patina for an aged look and washed and cleaned them, there were no black spots to see! The few that remained just added to the charm of the earrings (top left in the picture).

For the brooch, I cut the copper to shape and size and crumpled it a bit with my flat-nose pliers for an interesting texture and soldered the brooch pin to the back.

These earrings have pins (with butterfly) but could also just as easily have been hook earrings 

Silver solder with clear glass jewels hook earrings  

::

Nature inspires - Feather brooch

.

Nature provides us with the most inspiring items to use in our creations - feathers, pebbles, leaves, drift wood, crystals, glass - you name it, it's there for the taking!

Here I've combined a black triangle piece of stained glass, surrounded with silver solder, with a couple of rooster feathers, added a pin at the back and voila! a simple and elegant brooch for your jacket or coat lapel. Or you can even cheeckily pin it to your hat!

::

"Keepsakes" Pin Brooch

This pin brooch from the "Keepsakes" range contains 4 items. Two are vintage photographs sandwiched between two pieces of glass and enclosed with silver solder. Other items can also be used, like a piece of lace from a Christening or Wedding gown, a piece of vintage material or rose petals for romance, leaves to symbolise life or any other sentimental objects. The other two are an amber clear glass jewel and an Indian silver baublet on short chain links. All these are attached to an ordinary nappy pin, a clean and simple design.

All links are soldered closed for strength and to prevent the loss of any of the items.

::

Energy, passion and peace

The colour red is the colour of energy, passion and action. It is a warm and positive colour associated with our most physical needs and our will to survive. It exudes a strong and powerful masculine energy. Wearing red clothing or jewellery shows a vibrant personality and a passion for life.

Being the colour of physical movement, the colour red awakens our physical life force. It is the colour of sexuality and can stimulate deeper and more intimate passions in us, such as love and sex on the positive side or revenge and anger on the negative. It is often used to express love, as in Valentine’s Day.

Vibrant red oblong glass jewel earrings. The ease and simplicity of these earrings make a statement on their own, but when teamed with a matching brooch, adds extra whammy!

Red oblong glass jewel brooch hand-crafted with silver wire and silver solder, clasp at the back.

::

Blue is the coolest colour - the colour of the sky, ocean, sleep, twilight. Blue is often the chosen colour by conservative people. Blue is the calming colour. That makes it a wonderful colour to use in the home and to wear as jewellery.

Blue gives a feeling of distance. Artists use it to to show perspective. This is a good way to understand the energy of the colour blue - it allows us to look beyond and increase our perspective outward. It contains a cool vibration that is helpful to communication.

Round blue glass jewel brooch surrounded by copper and given a coat of patina for a vintage look. Clasp at back.

The vibration of blue can be used to open energy flow where it is blocked. So wear blue jewellery often to relax and encourage feelings of communication and peace.

 ::

Cow in the stable brooch and earrings

I once had the cutest little pendant made out of pewter, with this little cow looking over the stable door, hanging on a fine little chain. Unfortunately it broke, so I decided to try and utilise it and incorporated it into this brooch. The door can open, revealing a little man sitting on a stool, milking the cow.

The brooch surround is silver wire, filled with silver solder and a brooch pin soldered on the back. It was then given a coat of black patina to give it a vintage look. One of my favourite brooches to wear.

The earrings are hand-crafted from silver wire and brushed with a patina to give an antique look.

.